CupLock Casters, Adapters and Bases

Use: screw a starting base for a scaffold. It has an adjustable height to allow for compensation on uneven levels, so that a level scaffold is always attainable. Any scaffold base should always be placed atop mudsills that are on proven solid ground.
Standard Hollow Galvanized Screw Jack used in Cuplock and Ringlock Scaffolding.

Use: screw a starting base for a scaffold. It has an adjustable height to allow for compensation on uneven levels, so that a level scaffold is always attainable. Any scaffold base should always be placed atop mudsills that are on proven solid ground.
Standard Hollow Galvanized Screw Jack used in Cuplock and Ringlock Scaffolding.

The screw jack is used as a starting base for a scaffold where the supporting surface of the scaffold is on a slope. This Galvanized Swivel Base Jacks is the standard screw leg for Cuplock and Ringlock Scaffolding.

The caster adapter is used as a base connection point to a caster and provides a base rosette to begin scaffold construction. This adapter is used only for Cuplock Scaffolding. This will connect to a 12" system caster to enable your scaffold tower to roll.

The adjustable caster adapter is used as a base connection point to a 12" System Caster for mobile cuplock towers. It allows for 18" adjustability as well as a base rosette to begin scaffold construction.

The 12-inch scaffold caster wheels is used as a rolling base. It allows the scaffold to be moved to different locations without disassembling the scaffold.