• Can be used for ringlock and cuplock scaffolding
• Comes with Grade 8 bolt and nut

The starter base collar is connected at one of the many bases i.e., base plate, screw jack or swivel jack and provides a base rosette to begin Scaffold construction.

Clamp on leg to be used to take out one additional vertical between two verticles. This clamp on leg is only to be used with Ringlock Scaffolding.

Use: screw a starting base for a scaffold. It has an adjustable height to allow for compensation on uneven levels, so that a level scaffold is always attainable. Any scaffold base should always be placed atop mudsills that are on proven solid ground.
Standard Hollow Galvanized Screw Jack used in Cuplock and Ringlock Scaffolding.

• Attaches to most screw jacks and post shores
• Hot Dipped Galvanized
• Made out of High Strength Steel
• Threaded bolts are plug welded into U-Head for easy assembly to Jack or Post Shore.
• Comes with 4 nuts for secure fit.

Use: screw a starting base for a scaffold. It has an adjustable height to allow for compensation on uneven levels, so that a level scaffold is always attainable. Any scaffold base should always be placed atop mudsills that are on proven solid ground.
Standard Hollow Galvanized Screw Jack used in Cuplock and Ringlock Scaffolding.

Ladder brackets are used for holding the ladder in vertical direction by supporting with vertical pipe. This can be used for both ringlock and cuplock scaffolding, however most users refer to this as a cuplock ladder bracket. The ladder that matches with this bracket is the 14" Ladder. All 3', 5', and 10' cuplock 14" ladders use this ladder bracket.

The screw jack is used as a starting base for a scaffold where the supporting surface of the scaffold is on a slope. This Galvanized Swivel Base Jacks is the standard screw leg for Cuplock and Ringlock Scaffolding.

Clamp on leg to be used to take out one additional vertical between two verticles.

Ladder brackets are used for holding the ladder in vertical direction by supporting with vertical pipe. This can be used for both ringlock and cuplock scaffolding, however most users refer to this as a ringlock ladder bracket. The ladder that matches with this bracket is the 17" Ladder. All 3', 5', and 10' ringlock 17" ladders use this ladder bracket.

The caster adapter is used as a base connection point to a caster and provides a base rosette to begin scaffold construction

Adjustable U-Heads are used for supporting the beams in concrete slab support.
Scaffolding U-Head is sometimes referred to as Fork Heads

Steel ladders are used for climbing on erected scaffold. All of scaffoldssupply ladders have aggressive non slip rungs for safety. This ladder can be used for ringlock and cuplock, however most end users refer to this ladder as a ringlock ladder. The bracket you would use for this ladder is the 17" ladder bracket

Deck adapter is used to hold the ledger / horizontals which is fitted at top. Example of use: In cuplock scaffolding system to create dance floors.

The caster adapter is used as a base connection point to a caster and provides a base rosette to begin scaffold construction. This adapter is used only for Cuplock Scaffolding. This will connect to a 12" system caster to enable your scaffold tower to roll.

Steel ladders are used for climbing on erected scaffold. All of scaffoldssupply ladders have aggressive non slip rungs for safety. This ladder can be used for ringlock and cuplock, however most end users refer to this ladder as a cuplock ladder. The bracket you would use for this ladder is the 14" ladder bracket

The adjustable caster adapter is used as a base connection point to a 12" System Caster for mobile ringlock towers. It allows for 18" adjustability as well as a base rosette to begin scaffold construction.

The adjustable caster adapter is used as a base connection point to a 12" System Caster for mobile cuplock towers. It allows for 18" adjustability as well as a base rosette to begin scaffold construction.

Steel ladders are used for climbing on erected scaffold. All of scaffoldssupply ladders have aggressive non slip rungs for safety. This ladder can be used for ringlock and cuplock, however most end users refer to this ladder as a ringlock ladder. The bracket you would use for this ladder is the 17" ladder bracket

Steel ladders are used for climbing on erected scaffold. All of scaffoldssupply ladders have aggressive non slip rungs for safety. This ladder can be used for ringlock and cuplock, however most end users refer to this ladder as a cuplock ladder. The bracket you would use for this ladder is the 14" ladder bracket

Gates allow safe ladder access to and from the working platform. The spring gate mechanism ensures that the access opening remains fully closed at all times. this gate meets OSHA requirements for fall protection.

• This Expandable Access Gate works with Tube & Clamp, CupLock & RingLock Scaffolding
• The gate expands to work with all widths of Walk Thru Scaffold Frames (3', 42" & 5' widths)
• The Hinge Plate has 2pc 2" Dual Purpose Half Clamps which can connect on 1.6" Ø to 1.9" Ø tubing

Steel ladders are used for climbing on erected scaffold. All of scaffoldssupply ladders have aggressive non slip rungs for safety. This ladder can be used for ringlock and cuplock, however most end users refer to this ladder as a cuplock ladder. The bracket you would use for this ladder is the 14" ladder bracket

Steel ladders are used for climbing on erected scaffold. All of scaffoldssupply ladders have aggressive non slip rungs for safety. This ladder can be used for ringlock and cuplock, however most end users refer to this ladder as a ringlock ladder. The bracket you would use for this ladder is the 17" ladder bracket

The 12-inch scaffold caster wheels is used as a rolling base. It allows the scaffold to be moved to different locations without disassembling the scaffold.

Galvanized Scaffold racks are used for packing & storing larger components. These racks are Stackable with a 5,000 lb weight capacity.

Scaffold baskets are used for packing & storing smaller components.

Complete Package. 7' Universal Stair Stringers and Treads. Works with ringlock and cuplock scaffolding. Width of stairs is for a 3'6" Bay