Scaffolding Guard Rails & Gates

While other suppliers offer zinc-plated Guard Rails that end up full of rust within a year, Scaffolds Supply Cross Braces are Hot-Dipped Galvanized BEFORE the ends are pressed to ensure the entire surface of the Guard Rail is protected for maximum longevity!

• This Guard Rail satisfies OSHA fall protection requirements when installed correctly
• Ends of Guard Rails are stamped with dimensions
• This Guard Rail is 3'L center of hole to center of hole
• Pre-Hot Dipped Galvanized for maximum longevity

While other suppliers offer zinc-plated Guard Rails that end up full of rust within a year, Scaffolds Supply Cross Braces are Hot-Dipped Galvanized BEFORE the ends are pressed to ensure the entire surface of the Guard Rail is protected for maximum longevity!

• This Guard Rail satisfies OSHA fall protection requirements when installed correctly
• Ends of Guard Rails are stamped with dimensions
• This Guard Rail is 42"L center of hole to center of hole
• Pre-Hot Dipped Galvanized for maximum longevity

While other suppliers offer zinc-plated Guard Rails that end up full of rust within a year, Scaffolds Supply Cross Braces are Hot-Dipped Galvanized BEFORE the ends are pressed to ensure the entire surface of the Guard Rail is protected for maximum longevity!

• This Guard Rail satisfies OSHA fall protection requirements when installed correctly
• Ends of Guard Rails are stamped with dimensions
• This Guard Rail is 5'L center of hole to center of hole
• Pre-Hot Dipped Galvanized for maximum longevity

While other suppliers offer zinc-plated Guard Rails that end up full of rust within a year, Scaffolds Supply Cross Braces are Hot-Dipped Galvanized BEFORE the ends are pressed to ensure the entire surface of the Guard Rail is protected for maximum longevity!

• This Guard Rail satisfies OSHA fall protection requirements when installed correctly
• Ends of Guard Rails are stamped with dimensions
• This Guard Rail is 7'L center of hole to center of hole
• Pre-Hot Dipped Galvanized for maximum longevity

While other suppliers offer zinc-plated Guard Rails that end up full of rust within a year, Scaffolds Supply Cross Braces are Hot-Dipped Galvanized BEFORE the ends are pressed to ensure the entire surface of the Guard Rail is protected for maximum longevity!

• This Guard Rail satisfies OSHA fall protection requirements when installed correctly
• Ends of Guard Rails are stamped with dimensions
• This Guard Rail is 10'L center of hole to center of hole
• Pre-Hot Dipped Galvanized for maximum longevity

Scaffolds Supply's Female Guard Rail Post with Drop Locks meets OSHA's guard rail and fall protection requirements when installed properly. Don't forget the Toggle Pin, Span Pin or Pig Tail Pin to properly secure the bottom of your post onto your Coupling Pin.

• This Guard Rail Post fits over a 1-7/16" Coupling Pin and is then locked in place with a Toggle Pin, Span Pin or Pig Tail Pin
• Compatible with 1.69" S-Style Scaffold Frames
• Upper and lower locks secure Guard Rails at approximately knee and waist level (21" & 42" per OSHA requirements) to prevent workers from stepping or backing off the working platform level of a scaffolding while in use.
• Blue powder coating to prevent & protect against rust & scratching

Scaffolds Supply's Female Guard Rail Post with Candy Cane Locks meets OSHA's guard rail and fall protection requirements when installed properly. Don't forget the Toggle Pin, Span Pin or Pig Tail Pin to properly secure the bottom of your post onto your Coupling Pin.

• This Guard Rail Post fits over a 1-7/16" Coupling Pin and is then locked in place with a Toggle Pin, Span Pin or Pig Tail Pin
• Compatible with 1.69" S-Style Scaffold Frames
• Upper and lower locks secure Guard Rails at approximately knee and waist level (21" & 42" per OSHA requirements) to prevent workers from stepping or backing off the working platform level of a scaffolding while in use.
• Blue powder coating to prevent & protect against rust & scratching

Gates allow safe ladder access to and from the working platform. The spring gate mechanism ensures that the access opening remains fully closed at all times. this gate meets OSHA requirements for fall protection.

• This Expandable Access Gate works with Tube & Clamp, CupLock & RingLock Scaffolding
• The gate expands to work with all widths of Walk Thru Scaffold Frames (3', 42" & 5' widths)
• The Hinge Plate has 2pc 2" Dual Purpose Half Clamps which can connect on 1.6" Ø to 1.9" Ø tubing

Scaffolds Supply's 5'W x 7'L Guard Rail Set includes:

• 4pc - Guard Rail Post
• 4pc - 5' Guard Rail
• 4pc - 7' Guard Rail
• See Technical Specs for more information

Scaffolds Supply's 5'W x 10'L Guard Rail Set includes:

• 4pc - Guard Rail Post
• 4pc - 5' Guard Rail
• 4pc - 10' Guard Rail
• See Technical Specs for more information